New High Speed Water Jet Loom

specification

Product Features
JW817 series of water jet loom is used for weaving denier water resistant chemical fabric,and thin,medium or weightier fabrics of plain cloth,diagonal cloth,satin cloth and flower cloth.The range of weight is 50-350g/m².

Main technical parameters

Frame
The wallboard of the loom adopts high grades casting iron, the major beam adopts the seamless steel tube, which increases the stability of the frame and reduces the vibration. Therefore, the high quality and high production of the fabrics can be ensured.

Shedding Structure
The size of shedding connecting rob and lifting shaft are expanded, the broadside heavy heald frame (120mm) is adopted, therefore, the stability and clearness of the warp shedding can be ensured.

Filling Feeler System
No mater it is normal yarn or high twist yarn, low denier or high denier yarn, it can be accurately detected by the sensitive photoelectric weft feeler. When the weft breaks, the machine will stop in time, so the flaw in fabrics can be avoided.

Selvage Supporting Device
5 rows of needles; broadened overarm support and runner cloth; strengthened supporting edge; more stable runner cloth.

Selvage Weaving Formation
Fabric edge is of rope form, which too extremely tight to fall off. It's thickness is same as the fabrics, no color difference after dyeing; Alumium planetary form-light structure is adopted, it has the advantage of low noise and convenient replacement.

Alumium Alloy Component
The water sucking pipe base and weaving edge gear adopt the anodizing, which is artistic as well as endurable. Reed batten and roller are of stainless steel, which greatly increases its intensity and corrosion resistance.

Concentrated Lubrication
Easy operation, it gives the machine overall protection.

Beating-up System
Crank connecting rod structure and inertial beating up are adopted. The adoption of high frequency quenching in crank shaft enhances the abrasive resistance, hardness and intensity of the crank shaft. The diameter of crank shaft is expanded, and the 114*10mm seamless steel tube is adopted, which increase the intensity and endurance. Reed batten and slide carriage which are of stainless materials enhance the beating-up force, therefore, it can weave high density and middle thickness fabrics, the clothes weaved with it are impact.

Cutting System
The ceramic or hard alloy cutter is adopted, which is sharp and wearproof. Working with the imported connecting rod bearings, it can snip the weft precisely, whatever is it rough weft or thin weft.

Bearing and Crankshaft
All bearings in our products are imported from Sweden SKF, Germany FAG and Japan NSK. The imported bearings further enhance the abrasive resistance and endurance of the crankshaft.

Let-off System
Semi-positive continuous let-off system, enlarged let-off tension sensor (113mm). Working with the most advanced CVT can perfectly adjust the let-off amount.

Electronic Take-up System
Small and exquisite design, big output power, easy to adjust; full automatic rolling for all kinds of fabric to ensure synchronicity

Electronic Let-off System
Ensure the stability of let-off tension. Suitable of many types of fabrics. Enhance the quality of fabrics. The replacement of different fabrics is more convenient and fast, the efficiency can be greatly enhanced.



TR-serise water jet loom has been overall improved and strengthened in the aspects of let-off, shedding device, driving system and the stability of the whole machine, which are with high-speed stable continuous running capacity, products can be adopted into wide range; this machine can be equipped with single pump double nozzle free abb choosing system, double pump triple nozzle free abb choosing system; cam shedding device, dobby shedding device; electronic let-off and electronic take-up.

Reed Width: 150 170 190 210 230 260 280 300 320 340 360
Weft Insertion Rate: Max 2280m/min
Speed: Max 1200rpm (according to the species of fabrics)
Number of Heald: 2 4 6 8pcs (Cam: Max 10pcs Dobby: Max16pcs)
Installed Power: 2.2-4.5KW
Weft Density: 5-60 thread/cm